| Slant Six Forum https://slantsix.org/forum/ |
|
| 75 Dart Rear 10' Drums, "Strut Bar' springs? https://slantsix.org/forum/viewtopic.php?t=58089 |
Page 1 of 1 |
| Author: | Louise76 [ Fri Jul 17, 2015 11:10 pm ] |
| Post subject: | 75 Dart Rear 10' Drums, "Strut Bar' springs? |
75 Dart, rear 10" drums brakes, have a "strut bar' between the shoes, with an oval shaped spring on the strut. It's not in any kits, and the 2 big brake distributors here in Seattle determined that it is no longer available. They all say go to the dealer. (I might). Anyone have a good part number / source for that spring? or one that works OK? |
|
| Author: | Reed [ Sat Jul 18, 2015 12:28 am ] |
| Post subject: | |
I might have one of those. Let me check my parts stash tomorrow. |
|
| Author: | Pierre [ Sat Jul 18, 2015 12:35 am ] |
| Post subject: | |
Raybestos H1338. Rock auto has them closeout for less then a buck, O'reilly's website shows them in their house brand also (h1338-2). Plenty on ebay as well. |
|
| Author: | SlantSixDan [ Sat Jul 18, 2015 4:21 pm ] |
| Post subject: | |
Should be included in the genuine Chrysler hardware package, part number 4049 681. |
|
| Author: | Louise76 [ Tue Jul 21, 2015 10:58 pm ] |
| Post subject: | |
Thanks guys. Pressed for time, I was able to make a H-1336-2 work safely. Sorry I haven't been back here for a few days to reply to all, but I did order an H-1342-2 set just to see and try, but it has not arrived yet. if the H-1338's are correct, then I'll just buy a stash of new ones for stock, as our family is running 5 A-bodies with 10" rear drums. ( Reed, thanks for the offer!) 
|
|
| Author: | Louise76 [ Wed Jul 22, 2015 9:49 am ] |
| Post subject: | |
The H-1342-2's came. They are the exact dimensions but a slightly heavier gauge of wire making them stiffer. They would probably work, but I'll follow your lead and try a set of H-1338's for comparison. |
|
| Author: | Louise76 [ Fri Dec 11, 2015 12:50 pm ] |
| Post subject: | |
The H-1338-2 number is the exact fit. Rockauto. Thanks all. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|