| Slant Six Forum https://slantsix.org/forum/ |
|
| D150 remove ignition lock cylinder https://slantsix.org/forum/viewtopic.php?t=58109 |
Page 1 of 1 |
| Author: | Tim Keith [ Tue Jul 21, 2015 7:55 pm ] |
| Post subject: | D150 remove ignition lock cylinder |
I removed the steering wheel and the turn signal switch from my '85 D150. How do I remove the lock cylinder? |
|
| Author: | Nicademas [ Tue Jul 21, 2015 11:42 pm ] |
| Post subject: | |
Do you have the tilt column? If so I cant help but if not there is a stering wheel lock that needs removed and then there is a pin holding the tumbler in. put your key in the lock, push in the pin and it should slide out. But again I dont know about tilt columns...... |
|
| Author: | Tim Keith [ Thu Jul 23, 2015 9:27 pm ] |
| Post subject: | |
The FSM has been very helpful. I had to remove a snap ring. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|