just searching and it seems the 3.5" bore piston are not available just the 3.42" and 3.44" ??

I hope they will do more in the future as well. I bought 3.484 thinking I'd use the 3.503 for a rebuild.

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I would try calling Wiseco or Campbellenterprises(.com) on the phone.

Lou

_________________
Home of Slant6-powered fun machines since 1988

I forgot Cambell Enterprises thanks Lou

Are you ordering 1 or 6?
Part # might have changed. . I just ordered one from summit racing. Com in April. . It was at my house in 1-2 days.

Greg

_________________
http://www.youtube.com/hyperpack

I will have to dig up the receipt and post the new part#.. it was for a single. . Not the set.

Greg

_________________
http://www.youtube.com/hyperpack

6 going to do a low comp bottom for my drag car.

They seem to be avail. indvidually from the source..

http://wiseco.com/ProductDetail.aspx?ItemID=5112A104

You must be using custom rods to get low comp.

I will dig up the alternative part# when I get home.


Greg

_________________
http://www.youtube.com/hyperpack

Terry,


Try buying them Here:

http://www.wiseco.com/ShoppingCart.aspx

Or calling them too

This is the part # I used in June 2015 - 5112H104 This seems to be unavailable now,

Bu the old 5112A104 Part # is available. I do not see the Set available. You might have to order six individual pistons.

I am sure if you call them you can get soomething sorted out.


Good luck Greg.

_________________
http://www.youtube.com/hyperpack

no Greg, going to use stock 225 rod which will give me 7.1/1 compression. I am at 8.1/1 now.