Anyone know where I can get a set of P4286783 (I) and P4286784 (E) high flow valves for my /project?

Thanks

http://www.moparpartsgiant.com/parts/mo ... 86784.html


http://www.moparpartsgiant.com/parts/mo ... 86783.html


http://www.chicagoconnection.us/index.p ... cts_id=334


http://www.diyporting.com/angles.html

Thanks man they have exactly what I needed!!!!

Oops,

They say discontinued now. Any other guesses???

AFAIK, most of the MP stuff for Slants is long gone unless it also happens to fit a small block or big block.

Engnbldr valves still pop up once in awhile, but I think he was retiring too.

Ferrea used to have a drop in that would work in Slants, but I do not have the part numbers.

_________________
Official Cookie and Mater Tormentor.

http://sivalves.com/2016-SI-Catalog.pdf

Page 22.

The engnbldr exhaust valves are still on E-Bay, but he is definitely retiring

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I kind of figured that, but what you were asking about was,,,standard valves with a back cut,,
that is why I posted a how to link for cutting a valve back cut with a drill press, or any shop that does port flowing could also put in a back cut for you.
so unless the standard valves in the head you have now are badly burnt, have them reground and a back cut added. You will have exactly what you were asking for.

the Engine Builder and Ferrea valves listed are OS valves,

Awsome, my shop says they can do the backcut on the valves. Thanks for the grind post. I'll get it to them.