hi guys. I rebuilt the carb but have the dreaded peice left over. It looks to be the idle compensator gasket. It's a small yellow oring. any idea where this goes? It's not in the manual.

Thanks

It goes behind the bimetallic hot idle compensator, which in turn is behind the small rectangular sheetmetal cover on the driver's side of the carb.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

My type doesn't have those peices.The casting has those ports covered as well as the screw holes.

Then you don't need that O-ring.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

I thought it came off the the carb and not from the kit. I must have been wrong. Thanks for putting my mind at ease. Now, to get rid of the vacuum leak at the trottle rod.