| Slant Six Forum https://slantsix.org/forum/ |
|
| intake/exhaust torque https://slantsix.org/forum/viewtopic.php?t=61005 |
Page 1 of 1 |
| Author: | Valleyant [ Fri Apr 14, 2017 8:42 am ] |
| Post subject: | intake/exhaust torque |
Doc, When using a Dutra exhaust manifold should I adhere to the 10Lb's/ft spec?? thank you |
|
| Author: | DusterIdiot [ Fri Apr 14, 2017 4:15 pm ] |
| Post subject: | Yep... and... |
Yes, it depends on the gasket, but I've done 5-7 lbs on a nicely mated set with Remflex(all flanges the same depth and true)... and have gone to 20 max on a remflex with a very horribly mated set (each manifold had a different flange depth)....25 is too much... 10 is a good number, especially with the composite gaskets that come in the rebuild kits... |
|
| Author: | Valleyant [ Fri Apr 14, 2017 4:41 pm ] |
| Post subject: | thanks |
Thank you! DI |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|