| Slant Six Forum https://slantsix.org/forum/ |
|
| B-Body Slant Six https://slantsix.org/forum/viewtopic.php?t=8164 |
Page 1 of 1 |
| Author: | WannaBee68 [ Mon Jan 19, 2004 12:33 pm ] |
| Post subject: | B-Body Slant Six |
Hello, This summer I purchased a pretty cherry 1968 Dodge Coronet Deluxe 2 door post. It has a 225, 904, and an open 8 ¼ rear end. The engine has 108,000 miles and runs great. I purchased the car with the intention of ripping out the driveline and upgrading to a 383, 727, 8 ¾ Suregrip, etc. However, after searching around, I’ve found a few performance parts available for the slant six, and now I’m wondering if maybe I should build up the current engine. I guess the main thing that made me think I could build up the current engine was the parts on cliffordperformanceshop.com, specifically the Hyper Pak intake. Has anyone on the list used this? What kind of horsepower can I get out of this engine and still have it be street-able? Has anyone here built up a B-body slant six? I realize that the cost would probably be about the same (dropping in a new driveline vs. upgrading the current), and that I wouldn’t achieve the same level of performance, but I’m kind of attracted to the weirdness aspect of having a B-body slant six car. Any advice/help would be appreciated. Thanks, Tom |
|
| Author: | steponmebbbboom [ Mon Jan 19, 2004 3:39 pm ] |
| Post subject: | |
Congrats on finding a 2dr POST coronet. That's a pretty rare car. If it were mine Id probably restore it to original, then cave in to a few minor upgrades after a few years. Good on ya for saving the slant motor! Good luck with whatever you decide to do. |
|
| Author: | DusterIdiot [ Mon Jan 19, 2004 4:25 pm ] |
| Post subject: | We've had a few guys... |
We've had several B and C body guys in and out of here...just have to use the search command... I think one guy was pulling down some pretty nice numbers with 3.73's and a mild buildup with 4 barrel in a '65 Coronet... Shouldn't be any reason you can't build up an eye-popping fun ride that actually can get fair mileage too... -D.Idiot |
|
| Author: | Doc [ Mon Jan 19, 2004 5:48 pm ] |
| Post subject: | |
There are lots of "repop" Hyper-Paks out there, here is the latest report from a new user: http://www.slantsix.org/forum/viewtopic.php?t=8095 Be sure to check-out some of the Hyper-Pak engine build-up info in the articles section under "Slantsickness" DD |
|
| Author: | Eric W [ Mon Jan 19, 2004 6:38 pm ] |
| Post subject: | |
Cool, a slant six SuperBee! Many years ago I saw a '70 Coronet 2dr post in a wrecking yard.....wish I got it then. Nice to see another B body slant! Here's my baby...
|
|
| Author: | WannaBee68 [ Tue Jan 20, 2004 10:48 am ] |
| Post subject: | |
Thanks so much to all of you for the info! I read the articles, and that seems like quite and interesting build to do. I’m still not sure I’d be happy with the power output from the HyperPak/.060 over/milled head/big cam option, but it is something I will seriously consider. If anyone is interested in seeing some pix of my baby, shoot me an e-mail (tom_enroth@yahoo.com), as I don't have a way to post them here... Thanks again, Tom |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|