Which if any of the disk brake parts from a Volaré / Aspen will fit late model Darts and Valiants? I think the rotor and caliper is the same. What about the spindles and caliper mounts?

cfield@ll.net

You might check over at slantsix.com I had posted all the part numbers from the 1976 parts catalog on what can be used for a F to A body front disk brake swap...

-D.Idiot

res0aus2@verizon.net

The Spindles are not the same, though these parts are INTERCHANGEABLE (that's the key word) with the 73-'76 A-body setup

Caliper Adapters
Calipers
Rotors (Same)
Wheel Bearings
Seals
Dust Cap

The F-body spindles are 3/8" taller andw will change your suspension geomotry.


goldduster318@yahoo.com

Check out <A HREF="http://www.moparts.com">http://www.moparts.com</A> . They have a couple of very long threads on this topic. A lot of people checked in on this, including some heavy weight Mopar mag writers. Very interesting reading.



klesteb@aol.com