Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Dec 17, 2024 8:39 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Tue Aug 22, 2006 7:10 pm 
Offline
1 BBL (New)
User avatar

Joined: Tue Aug 22, 2006 6:44 pm
Posts: 3
Location: southwest, oh
Car Model:
i need help. i want to build a heavy wieght slant 6. I have a 67 plymouth valiant with a stock 225 single barrel. i want to get the car in the 11s in the 1/4. Plans already are mini tubs, a 6 point roll bar, and a 9 1/4 rearend. i am looking for suggestons. I would 400 hp or more. I will have the block bored .030 over and the head be milled .015 to boost the compration. i need suggestons on the delivery system like intake. is there any superchargers avalible or does anyone know how to build a rig to mount a supercharger to the motor. and what about fuel injection, any way to build a system. Am willing to junkyard hop. just want a powerful slant 6 to prove that it can beat a powerful small block chevy. all opinons are thankfully appricated.

:?:


Top
   
 Post subject:
PostPosted: Tue Aug 22, 2006 7:27 pm 
Offline
TBI Slant 6
User avatar

Joined: Sun Aug 29, 2004 7:00 am
Posts: 235
Location: Old Junee, Australia
Car Model: 69 Valiant 225, 70 with a 265, 70 with a 318
There is a few quick turbo slants owned by people on here, I am sure one of them could help you out.
Search youtube.com for slant and some good stuff will come up

_________________
Richard (aka Fingers)
Image


Top
   
 Post subject:
PostPosted: Tue Aug 22, 2006 7:30 pm 
Offline
SSRN National Champion
User avatar

Joined: Thu Oct 31, 2002 3:56 pm
Posts: 1967
Location: Dalton, GA
Car Model:
Damn brother how much money have you got to do this project :D Thanks Ron Parker












It Aint Over Until I Win


Top
   
PostPosted: Tue Aug 22, 2006 7:31 pm 
Offline
Turbo Slant 6
User avatar

Joined: Thu Jun 09, 2005 8:33 pm
Posts: 745
Location: Rolla, MO
Car Model:
There was talk of a supercharger kit a while back, but I dont' know if it ever materialized. If you look in the articles section, I believe there is one about a member who did it with mainly junkard parts. Turbo's have been done numerous times, by several members of the board.

Fuel injection is defintely possible with MegaSquirt. Again, several people on the board have done it, and there are numerous threads about it, as well as an article. Not to mention that MegaSquirt has it's own user group which seems to be very knowledgable.

Do you really feel a 9-1/4" rear is neccesary? From what I understand, they are overkill, heavy, and harder to find parts for.

_________________
Used to own:
'82 Dodge D150
Erson 270 Cam, O/S valves, mild port work, ~9.5:1 compression

Currently fighting with an '85 VW Cabriolet

My other passion


Top
   
 Post subject: need more answers
PostPosted: Wed Aug 23, 2006 4:51 pm 
Offline
1 BBL (New)
User avatar

Joined: Tue Aug 22, 2006 6:44 pm
Posts: 3
Location: southwest, oh
Car Model:
i dont plan on spending no more than 3000 on the motor. so i will have about 2100 after all the mechining. as of now i have a 7 1/4 rear end out of a 87 fifth ave. will that handle the power im hoping to achive? we have quite a bit of junkyards around here so finding late model parts is not a problem. how hard would it be to rig up a turbo set up and what about twin turbos. i can custom build a intake mainfold to handle a supercharger or turbo set up. i still want fuel injection, i want a multiport injection system. does any body have designs or pictures of supercharger setups, turbo setups, and fuel injection setups. so i plan how to attack this project

thanks for you help.

My email is moparhead572@yahoo.com


Top
   
 Post subject:
PostPosted: Wed Aug 23, 2006 5:32 pm 
Offline
Board Sponsor
User avatar

Joined: Fri Nov 01, 2002 5:29 pm
Posts: 963
Location: Eustis, FL
Car Model: '68 V100, '68 V200, '79 Aspen, '84 D100
There only one way I know to get 400 HP out of a slant for $3000..NOS..and even with that, you may not see 400 HP with reliability.

_________________
Slant Cecil


Top
   
 Post subject:
PostPosted: Wed Aug 23, 2006 6:15 pm 
Offline
SSRN National Champion
User avatar

Joined: Thu Oct 31, 2002 3:56 pm
Posts: 1967
Location: Dalton, GA
Car Model:
wo wo wo slow down to have a 11 second car in the 1/4 is going to cost you a lot more than 2100 dollars. You just cannot throw parts out of a junk yard and make them work. Trust me on this. A decent built nitiros engine for 300 hp will cost about 4000 dollars if you want it to last. Then you have a heavy car. I race a 2400 lb 69 Dart with about 300 hp and it goes about 12.50 in the 1/4. My engine was built for nitrios but never used it and it cost more than that to build. That is not counting rearend nope you would destroy a 7 1/4 with 300 hp. A 8 3/4 rearend with a spool with gears will cost you about 1000 dollars and the list goes on . Thanks Ron Parker




It Aint Over Until I Win






It Aint Over Until I Win


Top
   
 Post subject:
PostPosted: Wed Aug 23, 2006 7:57 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14507
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Spit the hook out Ron. :shock:

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Thu Aug 24, 2006 5:04 pm 
Offline
SSRN National Champion
User avatar

Joined: Thu Oct 31, 2002 3:56 pm
Posts: 1967
Location: Dalton, GA
Car Model:
yep got blind sided on new bait. Possum :D













It Aint Over Until I Win


Top
   
 Post subject:
PostPosted: Thu Aug 24, 2006 8:47 pm 
Offline
1 BBL (New)
User avatar

Joined: Tue Aug 22, 2006 6:44 pm
Posts: 3
Location: southwest, oh
Car Model:
ok, can someone tell me about turbos? I want a second opinion. will a twin turbo set up work if i get a offy dual single barrel intake and modify it for multiport fuel injection, custom build a spit exhaust to mount the turbos. Let me know any concerns or if you think that it might work or ever a good idea.

check out the intake.

http://www.offyparts.com/product_info.p ... 4cd472c6e8

thanks for helping


Top
   
 Post subject:
PostPosted: Thu Aug 24, 2006 11:31 pm 
Offline
Guru
User avatar

Joined: Sat Oct 12, 2002 11:22 am
Posts: 3740
Location: Sonoma, Calif.
Car Model: Many Darts and a Dacuda
Why use two turbos when one will do the job?
DD
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited