Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Nov 28, 2024 12:49 pm

Unanswered topics | Active topics


» » Tech Q & A » Suspension & Brakes

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
FrankRaso
PostPosted: Thu Sep 14, 2006 6:22 am 
Offline
Turbo Slant 6

Joined: Fri Apr 16, 2004 10:50 am
Posts: 660
Location: Stevensville, ON
Car Model:
I was reading Tom Condran's book (Performance Handling for Classic Mopars) and on Page 5 he writes:
Quote:
Regrettably, '65-72 rotors can not have the stud pattern re-sized to the large 4½" pattern common to other Mopars. There is no "meat" where the machinist would drill. And outside diameters of the hubs (which center wheels) match only small bolt-pattern wheels.

The bolt pattern can be up-sized only by swapping on rotors from a '66-69 B-Body, if you can find two of those rarities in good condition. These Bendix rotors - and not the calipers from that system - match A-Body knuckles and calipers as if they were built for them. They even share wheel bearings.
I see that Layson's Restorations and the Paddock carry a unicast (combined hub & rotor) version of this rotor. Has anyone tried this B-Body rotor on their A-Body K-H disc brakes? Does anyone know which company manufactures this rotor for Layson's or who else carries this rotor?

Frank
Top
   
Reply with quote  
vynn3
 Post subject:
PostPosted: Thu Sep 14, 2006 6:40 am 
Offline
Turbo EFI
User avatar

Joined: Fri Jul 16, 2004 5:22 am
Posts: 1134
Location: Carrollton, TX
Car Model:
Haven't tried them, but GOSH they're pricey! And I thought SBP KH rotors were expensive...

Of course, that could well be the good 'ol Layson's mark-up. Keep us posted if you track down the mfg and try a pair!

_________________
vm

Image
Top
   
Reply with quote  
Joshie225
 Post subject:
PostPosted: Thu Sep 14, 2006 7:02 am 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
Year One gets $207 each for those B-body rotors. They don't list the A-body K-H rotors.

Someone should call Stainless Steel Brakes and see if their dual bolt pattern rotors will fit the K-H disc brake spindles.

Ok, just called SSB and no dice. Of course if one wanted to put 10" drum spindles on their car they would work, but that's a screwy way to go about it.

_________________
Joshua
Top
   
Reply with quote  
64'4$peed
 Post subject:
PostPosted: Sat Sep 16, 2006 10:31 am 
Offline
EFI Slant 6
User avatar

Joined: Fri Apr 21, 2006 4:47 pm
Posts: 374
Location: SF CAL
Car Model:
Is he saying that the SBP B body rotors fit 9" drum spindles? or that B body BBP rotors fit SBP Abody disc spindles?

_________________
64' Valiant Signet 5.9, 64' Dart 170 moredoor 3.7, 67' A100 3.7, 00' Dakota SLT 4.7
Image
Top
   
Reply with quote  
relic-lover
 Post subject: When I read it I thought
PostPosted: Sat Sep 16, 2006 1:16 pm 
Offline
EFI Slant 6

Joined: Tue Jun 03, 2003 9:42 pm
Posts: 358
Location: San Diego, California
Car Model:
Condran was saying -
The 66-69 B body rotors (with a BBP) will fit the spindles for the Abody K&H SBP discs (65-72).

So if you have a SBP Abody K&H disc setup and you want to go to BBP wheels you could just change to those rotors.
Top
   
Reply with quote  
64'4$peed
 Post subject:
PostPosted: Sat Sep 16, 2006 6:17 pm 
Offline
EFI Slant 6
User avatar

Joined: Fri Apr 21, 2006 4:47 pm
Posts: 374
Location: SF CAL
Car Model:
got it.

_________________
64' Valiant Signet 5.9, 64' Dart 170 moredoor 3.7, 67' A100 3.7, 00' Dakota SLT 4.7
Image
Top
   
Reply with quote  
SlantSixDan
 Post subject:
PostPosted: Sat Sep 16, 2006 9:55 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Frank: Be really careful with Condran's book. There are some decent suggestions in there, but it is full of factual and theoretical errors.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image
Top
   
Reply with quote  
emsvitil
 Post subject:
PostPosted: Sat Sep 16, 2006 11:02 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
If you want a book on handling modifications I'd get


How to Make Your Car Handle

by
Fred Puhn

ISBN 0-912656-46-8

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)
Top
   
Reply with quote  
FrankRaso
 Post subject:
PostPosted: Sun Sep 17, 2006 7:44 am 
Offline
Turbo Slant 6

Joined: Fri Apr 16, 2004 10:50 am
Posts: 660
Location: Stevensville, ON
Car Model:
I suspected that Tom Condran (or Richard Ehrenberg for that matter) may have errors in his book, which is why I'm asking others about their experiences. I have Mopar Suspensions by Mike Martin too and I see there are errors (or at least incomplete information) in that book.

Frank
Top
   
Reply with quote  
dart -66
 Post subject:
PostPosted: Sat Feb 03, 2007 1:24 pm 
Offline
1 BBL (New)
User avatar

Joined: Thu Feb 03, 2005 9:42 am
Posts: 8
Location: Lahti, Finland
Car Model:
Quote:

Someone should call Stainless Steel Brakes and see if their dual bolt pattern rotors will fit the K-H disc brake spindles.

Ok, just called SSB and no dice. Of course if one wanted to put 10" drum spindles on their car they would work, but that's a screwy way to go about it.
Does anyone know, how much there is difference between ssb dual bolt pattern and original A-body K-H disc? Could it be used in with some mods?

_________________
-66 Dart 170 2d sedan 225+3-speed+7,25
-68 Dart 270 4d 225+3-speed+7,25 my first Dodge, R.I.P
-66 Satellite 2dht 273+904+8,75 (gone)
-and others
Top
   
Reply with quote  
stolan83
 Post subject:
PostPosted: Sun Feb 18, 2007 1:33 am 
Offline
TBI Slant 6

Joined: Thu Nov 24, 2005 9:14 pm
Posts: 172
Location: Roy Utah
Car Model:
if you are look for rotor I posted a company that still makes the small bolt rotor about 6 months a go. IF you need the info I will dig through my files and find it just let me know

_________________
225+0.080 at 10:1
268cam
holley 390
clifford headers
8 3/4 355's lsd
kh brakes
electronic ing
Top
   
Reply with quote  
dart -66
 Post subject:
PostPosted: Sun Feb 18, 2007 2:20 am 
Offline
1 BBL (New)
User avatar

Joined: Thu Feb 03, 2005 9:42 am
Posts: 8
Location: Lahti, Finland
Car Model:
I need just the info at this time.

_________________
-66 Dart 170 2d sedan 225+3-speed+7,25
-68 Dart 270 4d 225+3-speed+7,25 my first Dodge, R.I.P
-66 Satellite 2dht 273+904+8,75 (gone)
-and others
Top
   
Reply with quote  
stolan83
 Post subject:
PostPosted: Tue Feb 20, 2007 7:49 pm 
Offline
TBI Slant 6

Joined: Thu Nov 24, 2005 9:14 pm
Posts: 172
Location: Roy Utah
Car Model:
the brand is Centric. The part #121.63005. I payed 27.83 a peice for them. The name of my supplyer is Navada brake and auto 702-382-1020
Hope this help. The people there were really nice. they spent about an hour looking through vender books with me to these

_________________
225+0.080 at 10:1
268cam
holley 390
clifford headers
8 3/4 355's lsd
kh brakes
electronic ing
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 13 posts ] 

» » Tech Q & A » Suspension & Brakes

All times are UTC-08:00

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited