Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 30, 2024 12:39 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sun Jun 10, 2007 1:57 pm 
Offline
EFI Slant 6

Joined: Sat Sep 13, 2003 9:45 pm
Posts: 446
Car Model:
I'm trying to decide whether to put this stock four-blade fan on with a spacer or without.

With the spacer (which is a little under 1 inch) the blades are only 9/16" from the radiator.

If I leave the spacer off, it's 1 1/2".

If the fan is 1 1/2" away, is that a good distance for a fan shroud?

_________________
63 Signet / 10 inch front drums / weber 2bbl / HEI / 2.76 rear end


Top
   
 Post subject:
PostPosted: Sun Jun 10, 2007 2:11 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
9/16 seems a bit close unless you have solid motor mounts.....

A shroud should cover half of the blade...

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)


Top
   
 Post subject:
PostPosted: Sun Jun 10, 2007 2:17 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24447
Location: North America
Car Model:
The closer the fan to the radiator, the better the low-speed cooling. The '60-'62 A-bodies have almost no clearance (certainly less than an inch) even without a spacer. But yeah, you've got to make sure your engine mounts are in good shape.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
PostPosted: Sun Jun 10, 2007 3:03 pm 
Offline
Turbo Slant 6

Joined: Tue Jun 14, 2005 8:29 pm
Posts: 797
Location: Raleigh, NC
Car Model:
I run mine with 1/2 inch space. I cut and milled a spare long spacer to make it happen. I admit to having gooooood mounts! Never ran over 190 degrees yet even at idle in summer.

rock
'64d100


Top
   
 Post subject:
PostPosted: Sun Jun 10, 2007 3:11 pm 
Offline
EFI Slant 6

Joined: Sat Sep 13, 2003 9:45 pm
Posts: 446
Car Model:
So is 1 1/2" too far without a shroud?

I'll be running it without a shroud this summer.

Is a 1/2" spacer recommended (fan would be about an inch away)?

The motor mounts are about a year old, but I don't really trust the engine to stand still after I close the hood.

_________________
63 Signet / 10 inch front drums / weber 2bbl / HEI / 2.76 rear end


Top
   
 Post subject:
PostPosted: Sun Jun 10, 2007 3:22 pm 
Offline
Supercharged
User avatar

Joined: Mon Jan 15, 2007 5:05 pm
Posts: 3767
Location: Black Diamond, WA
Car Model:
Mine was the same distance, 1 1/2" with the 4 blade and it ran at normal operating temps. I am now running the Mopar clutch fan and 5 blade sold by Summit and I have less than a 1/2" and am using new mounts. It runs luke warm........145 to 155 with a 195 stat. So it is a little too efficient. New 19" Modine radiator and heater cores. I would think with a shroud you would be fine at 1 1/2".

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot] and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited