Can you guys help me get a parts list together to convert the front drums to disc's plz?

There are lots of ways to do this. Here are a few resources:

http://www.moparaction.com/Tech/archive/disc-main.html

http://www.bigblockdart.com/techpages/d ... sion.shtml

http://www.scarebird.com/

_________________
"When you find a big kettle of crazy, it's best not to stir it." - Pointy-haired Boss

1964 Valiant V200, 225/Pushbutton 904
BBD, CAI, HEI, LBP, AC, AM/FM/USB, EIEIO

Well after reading those i think i may have some of the parts needed on a 86 fith avenue

73+ A body donor parts (new or used):
spindles, caliper brackets, calipers, front hoses, rotors, bearings, dust seal, splash shields (nor req., but nice to have) UCAs, lower ball joint, dual master cyl., propotioning valve.

Yes, the FJM body spindle can be used on the A body conversion (see BigBlockDart tech pages. Some say no (see mopar action tech pages).
I personally have used the FJM spindles with no problem. From the FJM you can use: spindles, calipers, rotors, splash shields, bearings, seals, hoses, proportionings valve (looks much different than the 73-75 drum/disk valve),

You still need the UCA (I think I have another set kicking around, I'll look)
IF you need pictures, I just did the swap on my 64. The car is for sale, see the ebay link for picts on the brakes.

wheres the ebay link?? Pictures would help.