Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 1:40 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 12 posts ] 
Author Message
 Post subject: bad hydrolic lifter
PostPosted: Sun Mar 16, 2008 3:51 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 20, 2008 11:29 am
Posts: 1290
Location: Silver Spring, Maryland U.S.A.
Car Model:
our 1985 dodge ram 100 had old leaking cork valve cover gasket so when I put a new felpro valve cover gasket on, I notice I had non adjustable rocker arms. and that one was lose and clicking. also i notice 3 push rods were'ny oiling..any thoughts how to repair ?

_________________
Image
slant six's RULE!
http://www.usajon.com


Top
   
 Post subject:
PostPosted: Sun Mar 16, 2008 4:06 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14984
Location: Park Forest, Illinoisy
Car Model: 78 Volare
Check the rockers, the lifters/pushrods oil from the top down. :D

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Sun Mar 16, 2008 4:52 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 20, 2008 11:29 am
Posts: 1290
Location: Silver Spring, Maryland U.S.A.
Car Model:
i'm thinking i have a slightly colisped lifter..and a few clogged pushrods..we have put 6K miles on it since the valve cover job...

_________________
Image
slant six's RULE!
http://www.usajon.com


Top
   
 Post subject:
PostPosted: Sun Mar 16, 2008 5:00 pm 
Offline
Supercharged
User avatar

Joined: Mon Sep 26, 2005 5:09 pm
Posts: 2946
Location: Gilbert, Arizona
Car Model: 1962 Plymouth Valiant Signet
The oiling path is though the rear rocker shaft standoff, the rocker shaft, rockers, the down through the pushrods. A clooged pushrod or rocker with prevent oil reaching the lifter. If the lifter doesn't get oil it will collapse.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.


Top
   
 Post subject:
PostPosted: Sun Mar 16, 2008 6:19 pm 
Offline
Turbo Slant 6

Joined: Thu Jul 13, 2006 8:05 pm
Posts: 770
Car Model:
I find the rockers stopped up most of the time this happens, a good cleaning and things return back to normal.



Jess


Top
   
 Post subject: Same deal?
PostPosted: Tue Mar 18, 2008 7:18 am 
Offline
Turbo Slant 6

Joined: Tue Dec 12, 2006 7:44 pm
Posts: 800
Location: New England
Car Model:
I have this problem on my other, non-SLANT 6, A-body with the hyd. cam adj rocker 340 (1971). Does anyone know if this oils through the rocker arm similarly, or should I just go to 'wrongplacetoask.com' :oops:


Top
   
 Post subject:
PostPosted: Tue Mar 18, 2008 7:23 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14984
Location: Park Forest, Illinoisy
Car Model: 78 Volare
340 oils the rockers through the shaft. The pushrods are solid, no oil comes up through them. (or goes down) :D

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Tue Mar 18, 2008 8:30 am 
Offline
Turbo Slant 6

Joined: Tue Dec 12, 2006 7:44 pm
Posts: 800
Location: New England
Car Model:
Thanks, Slantzilla. I'll start with the rockers.


Top
   
 Post subject:
PostPosted: Tue Mar 25, 2008 9:19 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 20, 2008 11:29 am
Posts: 1290
Location: Silver Spring, Maryland U.S.A.
Car Model:
Quote:
I find the rockers stopped up most of the time this happens, a good cleaning and things return back to normal.



Jess
whats the pro way to remove the rocker shaft. I sure don't want to drop anything into the internals..

_________________
Image
slant six's RULE!
http://www.usajon.com


Top
   
 Post subject:
PostPosted: Tue Mar 25, 2008 9:27 pm 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
You just described the Pro way. Don't drop anything! It's pretty easy really. Loosen each bolt a turn or so at a time until they are free. I get away with then lifting the whole assembly off the head with the bolts still resting in the shaft. Haven't lost anything down an engine yet.

_________________
Joshua


Top
   
 Post subject:
PostPosted: Sun Apr 20, 2008 11:30 am 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 20, 2008 11:29 am
Posts: 1290
Location: Silver Spring, Maryland U.S.A.
Car Model:
well i took the rockarm assembly apart. some of the rear ones were carboned pretty bad..aprox 2.5 hour job to remove clean replace..oil change / still a tappin...looks like a bad lifter as when I check rocker arms and pushrod tubes they all flowed through their holes/ports.
HOW do you take out the old lifters and replace with NEW ones without removing the head... A special tool ? just wondering...thanks

_________________
Image
slant six's RULE!
http://www.usajon.com


Top
   
 Post subject: Woof...
PostPosted: Sun Apr 20, 2008 1:46 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
HOW do you take out the old lifters and replace with NEW ones without removing the head...
on the 1975-1987 heads you have to remove the head, the holes aren't big enough to pull the lifters through like the earlier drool tube heads...


-D.idiot


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Google [Bot] and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited