Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 20, 2026 7:36 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Does anyone remember
PostPosted: Mon Apr 21, 2008 11:04 am 
Offline
EFI Slant 6
User avatar

Joined: Tue Jan 15, 2008 4:55 pm
Posts: 460
Car Model:
A friend of my dads say there was a bracket that held up the exhaust on a slant six to keep the manifold from cracking and said without it it would possible crack so anyone know what im talking about if so got a pic of one would be nice to seee?

_________________
1972 Plymouth Duster 225 Super Six Slant


Top
   
 Post subject:
PostPosted: Mon Apr 21, 2008 11:26 am 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 02, 2005 12:47 pm
Posts: 445
Location: Runge, TX
Car Model: 1974 W100; 72 Dart
Usually the exhaust manifold cracks from being torqued down too tight, thus keeping it from being able to expand and contract with heating/cooling cycles.

As far as a bracket that holds it up? :?:

Maybe someone else has some input.

sb


Top
   
 Post subject:
PostPosted: Mon Apr 21, 2008 11:32 am 
Offline
Supercharged
User avatar

Joined: Wed Oct 12, 2005 9:00 pm
Posts: 3303
Location: kankakee IL
Car Model: 80 volare, 78 fury 2 dr, 85 D150
I have seen what you are talking about and have seen it on different Chrysler RWD models regardless of engine on cars new enuf to have a catalytic converter, because of th extra weight they bring to the ex. system.


Top
   
 Post subject:
PostPosted: Mon Apr 21, 2008 11:38 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
It's a simple metal strap with a quarter-twist in it. The top bolts to one of the engine-to-bellhousing bolts, and the bottom has two holes spaced to receive an ordinary exhaust pipe U-clamp. This supports the exhaust pipe so as to relieve the pipe-to-manifold junction of some of the stress.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Apr 21, 2008 11:53 am 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 02, 2005 12:47 pm
Posts: 445
Location: Runge, TX
Car Model: 1974 W100; 72 Dart
I've seen that. Didn't even think of that from the OP's question. I was imagining some huge metal bracket on the engine cradling the manifold! :oops:


Top
   
 Post subject:
PostPosted: Mon Apr 21, 2008 11:56 am 
Offline
EFI Slant 6
User avatar

Joined: Tue Jan 15, 2008 4:55 pm
Posts: 460
Car Model:
lol welll me and dad where gonna fasion a braket for it

_________________
1972 Plymouth Duster 225 Super Six Slant


Top
   
 Post subject:
PostPosted: Mon Apr 21, 2008 1:33 pm 
Offline
Turbo Slant 6

Joined: Thu Jul 13, 2006 8:05 pm
Posts: 770
Car Model:
Be sure and make it to where it does go to the bellhousing, trans, or engine block. In other words dont hook it to the body/frame in anyway. That would cause stress and even transmit vibration to the passager compartment.



Jess


Top
   
 Post subject:
PostPosted: Mon Apr 21, 2008 1:35 pm 
Offline
EFI Slant 6
User avatar

Joined: Tue Jan 15, 2008 4:55 pm
Posts: 460
Car Model:
got ya jess

_________________
1972 Plymouth Duster 225 Super Six Slant


Top
   
 Post subject: Yep...
PostPosted: Mon Apr 21, 2008 2:22 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
It's a simple metal strap with a quarter-twist in it. The top bolts to one of the engine-to-bellhousing bolts, and the bottom has two holes spaced to receive an ordinary exhaust pipe U-clamp. This supports the exhaust pipe so as to relieve the pipe-to-manifold junction of some of the stress.
There are two versions of the bracket...

On the 70's cars up to 1975 it's attached to the tranny bellhousing and has a simple loop... with the advent of the catalytic convertor and the 'two' pipe system (the header from the manifold to the tranny crossmember, and the 'rest of the exhaust pipe' with the cat and muffler... there is an added bracket just past the cat. convertor that attaches to the tranny crossmember drivers side bolts...

Afterupsizing pipes I've never used either, and I've only used the manifold 'kickstand' on the hyperpak as a just incase...

I probably have a couple of those laying in a bin someplace... the 1973-1974 version is like 1/4" plate and a slot for the round pipe bracket and bolt.

-D.Idiot


Top
   
 Post subject:
PostPosted: Tue Apr 22, 2008 10:41 am 
Offline
Turbo EFI
User avatar

Joined: Sun Nov 03, 2002 1:49 pm
Posts: 2445
Location: Lubbock, TX
Car Model:
According to my '71 shop manual, the support is used only in fleet (read police and taxi) vehicals equiped with the 225. Cant find my '72 manual, but I assume it says the same. Just FYI.

Edit: Its only on the B body where the pipe runs under the passenger side of the engine.


Last edited by Eric W on Thu Apr 24, 2008 10:06 am, edited 1 time in total.

Top
   
 Post subject:
PostPosted: Tue Apr 22, 2008 12:13 pm 
Offline
EFI Slant 6
User avatar

Joined: Tue Jan 15, 2008 4:55 pm
Posts: 460
Car Model:
does anyone has a picture of this bracket

_________________
1972 Plymouth Duster 225 Super Six Slant


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot], DuckDuckGo [Bot] and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited