The warehouse out here (Los Angeles) supposedly had only two, but they sold them to me for the $2.40 price. They say I can pick them up tomorrow. The guy really seemed to think it was a mistake.

Got one. Found it at a PB across town (Pep Boys ain't doin' too well around these parts), and I had a friend pick it up for me, and I'll get it when I see him Sunday.

$2.70, as stated. Thanks for the heads-up!

_________________
vm

I just got two pumps here in Orlando.
One pump has a cast in USA, a pressed on gear with no key, has two humps on the oil cover, and came in a fresh looking Melling box with M-66C. "MADE IN MEXICO"
The other one has NO cast in USA, pressed on gear with no key, a plate steel flat cover, and came in a beat Clevite box with P66C label, but has a new Melling label M-66C over it.

_________________
67Cuda,FAST EZEFI,340cu,CR=10.25,RollerCam&Rocker (XR268HR,#20-810-9)(#1622-16)(EddyRPM#60779,#7576), (MSD6AL,#6425) A904, GearVendorsOD, 8 1/4,3.55:1, ClassicAir

Did you make a typo or did they 'gouge' you an extra .30 cents? I paid $2.40 for the ones I ordered.

I still think this is "to good to be true" so people who have pumps in hand at this low peice, have themselfs a great buy...
My bet is that the ebay price for these pumps just took a dive.
DD

Oops...

_________________
vm

Boy, I sure hope not. I was planning on peddeling 99 of the 100 pumps I ordered, to pay for my racing.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Hi,
Well, you could sell one a week and fill your gas tank for 2 years
but seriously I hope this does not mean that parts availability for our slant six cars will become more scarce. I did buy a couple in preparation for eventuality....What is the best way to store and preserve them for when they are needed?? thanks, nico

Keep them dry. Any type of oil coating will help but a grease or oil that has a corrosion inhibitor made for preserving parts is the thing to get. The old types worked very well but were rather toxic. An industrial or machine shop supply, a bearing shop, should have something. Cosmoline used to be the most common thing. We used to use a Maltby (probably spelled that wrong) brand spray on engines and it worked real well too.

Just got the last 4 at my local PB.

holy cowwwww....

no pep boys up here...

_________________
I've been calling it as i see it for my entire life and that's not about to change. Take it or leave it.

Kewl

I just picked up several this morning that I ordered last week from the warehouse. I have a use for two of 'em right now.

Thanks for the heads up!

CE

_________________
-76 Cordoba, 360 4bbl
-68 Valiant, 273 2bbl
-67 Dart /6 4bbl, Leaning Tower of Power!!!

Charrlie,

Thanks for the word! I got two, one from the store and one ordered in from Atlanta. I got the same mix Brennan did...one flat cover, one humped cover, Melling and Clevite, etc. How odd. My counter guys noted they ought to buy em new and sell em to a junkyard for $8 for resale.

rock
64d100

For some strange reason, I'm suddenly seeing a whackload of new slant-6 oil pumps on eBay for $20 to $40.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

If anyone has a spare send me a pm.

_________________
Ronnie
http://www.cardomain.com/ride/2714941