The more I read this site I see more different manifolds having been made for the slant six stock and aftermarket, It would be interesting if someone could make a list of the wide variety made for this fine engine.

_________________

Grandpa's 1974 Dart Custom 4 door 225 auto, Aluminum Radiator, 1920 Holley.

Dan might have access to the best list, with part numbers but we know there are at least a dozen or more. Here is a shot at a list.......

1. MOPAR M-1 for two barrels
2. The Super Six E-beam
3. Truck version single barrel aluminum
4. Truck version aluminum two barrel
5. Offenhauser 4 barrel
6. Offenhauser dual single barrel
7. Weiand 4 barrel
8. Clifford 4 barrel
9. The HyperPak
10. The Dutra HyperPak
11. Aussie Speed 2 barrel
12. Aussie Hurricane 4 barrel
13. plus all the variations of stock cast iron 1 and two barrel manifolds
14. and maybe some 2 and 4 barrel from South Africa

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG

Don't forget the late 60s export/"marine" two barrel intake and the "Lynx" single, double, and triple side draft carb intakes from Oz.

Basil Green Atkinsons Power-Pack 2 X 2bbl weber "dual plane" shorty
South african Police Squad Car manifold 2 X 2bbl weber long runner Ram design
Late Model - 78 - 81 CL Regal SE 4BBL for Carter AFB
Prototype "tunnelram" 4BBL for South African Police

For export market - Round 67/68 from Canada - Castiron manifold for BBD

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

Clifford triple Weber intake

All the Cain stuff.

_________________
Official Cookie and Mater Tormentor.

Pierce triple Weber. This may be the same as the Clifford item.

_________________
"Mad Scientist" Matt Cramer
'66 Dart - turbocharged 225
My blog - Mad Scientist Matt's Lair

Did Edelbrock make one once upon a time? I think I read that in Josh Skinner's article.

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)

Hey do you happen to have a pic of that one?

Clifford Hyperpak (same as the Dutra)
And I think there is a Sissell intake for Webers, just read about that one never seen it.

_________________
<img src="http://farm4.static.flickr.com/3173/2992308402_5481afb26e_t.jpg">

Chrysler-built intakes (not including South African ones 68Barracuda mentions, nor engineering prototypes):

1. 1960 semipermanent-mold aluminum 1bbl, no PCV
2. 1960 sandcast aluminum 1bbl, no PCV
3. 1960-'61 Hyper Pak cast aluminum 4bbl
4. 1961 cast-iron 1bbl, no PCV
5. 1961-'64 cast-iron 1bbl, with PCV
6. 1964-1967 cast-iron 1bbl, with sidedraught carb mount
7. 1965-'69 cast-iron 1bbl, reinforcement webs between runners
8. 1965-?? aluminum 2x 1bbl, Argentina
9. 1967+ cast-iron marine 2bbl
10. 1967+ cast-iron export 2bbl (probably same as marine)
11. 1967+ cast-iron Australian-made 2bbl
12. 1970-'72 cast-iron 1bbl, with large hotbox pocket
13. 1972 cast-iron 1bbl, with floor jet EGR
14. 1973+ cast-iron 1bbl, with EGR valve
15. 1976 sandcast aluminum 1bbl, with EGR valve
16. 1976-83(?) cast-iron 2bbl, with EGR valve
17. 1978- EB-welded aluminum 1bbl
18. 1978- EB-welded aluminum 2bbl
19. 19??-'?? cast aluminum 1bbl
20. 19??-'?? cast aluminum 2bbl

Aftermarket intakes (list certainly incomplete):

1. Dutra-Pak 4bbl
2. Weiand 4bbl
3. Offenhauser 4bbl
4. Offenhauser 2x 1bbl
5. Warneford 3x SU
6. Cain 3x SU
7. Speco 3x SU
8. Cain 2x SU
9. Cain 4bbl
10. Penìn parallel 2bbl (Argentina)
11. Assorted Clifford hot air manifolds
12. Mays 2x 1bbl
13. 3x Weber (Australian, forget brand)
14. Speco 2x 1bbl

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

The list is complete with these on there

Greg

_________________
http://www.youtube.com/hyperpack

Will have a look - they apparently did itfirst as an experiment for Naturally aspirated, then used it for a Turbo application which worked quite well

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

Redline in Australia make a 4BBL intake, a 3 x Weber intake(could be the one you've mentioned Dan) and a 3 x SU intake. I believe these are the same as the old Cain intakes.

_________________
62 Valiant, 225cid Slant 6/PB 904 with lots of good bits

http://www.moparmarket.com/readersrides ... user=SV162

There's also a couple of single Weber intakes around, they were made by Lynx and possibly Speco.
Here's a Lynx one.

_________________
62 Valiant, 225cid Slant 6/PB 904 with lots of good bits

http://www.moparmarket.com/readersrides ... user=SV162

Here are some "group photos":
DD