Did your cam bearing spin??
Frank

_________________
Scrapple: Because a mind is a terrible thing to waste.
73 Duster - Race Car
66 Dart Wagon - DD
178" FED
82 D150
All Slant powered

I was beginning to wonder. I wouldn't know how to check without major dissassembly? Gmac

This sounding all too familiar! Same problem, no oil to rockers. New short block, and a bunch of other EXPENSIVE stuff!
Cam manufacturer says "not the cam oiling holes".
Other experts say "has to be".
Some people say, "use a high volume oil pump".
Some say groove #4 cam bearing...
Others say you will lose oil pressure if you do. Stiil others say "NO". Some say the rear rocker bolt should have a different size shank, others say no is does not??
Good god, does anybody have an answer? I just want to put the motor back in the car and drive! This is not a high tech build just a built slant six for the street.

If the engine is out of the car.. just groove the rear cam bearing or rear cam jounal and it will oil the rockers.
DD