Update: If anyone else wants mounts, please fill out the form ASAP, deposits are now being put down. Read on for more information[/b]

DEPOSIT INFORMATION

Please make sure you indicate on the deposit (paypal or mail) that you are ordering 62-66 Slant Six engine mounts.

Paypal: glhs289@hotmail.com

Check by Mail:
Johnny Spiva
PO Box 4283
Coos Bay Oregon 97420

---------------------------------------------------------------------
To participate, please take a moment to fill out the order form

Everyone who has expressed interest needs to fill this form out!
-------------

List of Buyers (as of 9/21/09
Number of Sets ordering @ $99/set First Name Last Name
2 CJ Stoakes
1 Daniel Stern
2 Dick Sappington
1 Ray Taylor
1 Frank Brent
1 Gary Sand
1 Dana Chapman
1 Anthony Todaro
2 Steve Whitmarsh
1 Charles Hudacko
1 Doc Dodge (Dutra)
2 David Kight
1 Michael Hughes
1 Rod Bond
1 Menko Johnson
1 Louis Madsen
1 Seymour Pederson
1 Daniel Miller
1 Mike Andreas
1 Chuck Ellis
2 Richard Bjerklund
1 Greg Mader
2 Walter Lee Jackson
1 Matt Cramer
2 silas branton
2 Michael Robinson
1 firoz mohammed
1 Matthew Cramer
1 James Christianson




If your name is not on this list, please fill out the order form[/b][/u] and be sure you get to the confirmation page. Deposits will be rounded up in mid-September.
------------------
Hi everyone,

As you know, several people on this list, namely SlantSixDan, have tried for years to get vendors like Imperial interested in making poly engine mounts for the early A body slant six cars. It has never materialized, however, the spool mounts for '73+ cars created by Johnny at Polybushings.com have been well received which spurred us to contact Johnny and see what it would take to have him make some for the early 62-66 cars.

The cars these mounts would be designed for are:
US & Canadian Cars:
'62 Dodge Lancer
'62-'66 Plymouth Valiant
'63-'66 Dodge Dart
'64-'66 Plymouth Barracuda

Australian cars:
S, AP5, AP6, and VC Valiants

Now for the group buy information. Johnny has committed to building these mounts IF we get a minimum of 15 sets ordered. At that small size run, the price will be around $100 per set. If we had 25 sets, the price would decrease by about 10%

Since these mounts are not currently in production, each person will be asked for a $20 deposit as a good faith measure to demonstrate that there is a large enough group of committed buyers for these mounts.

I know the price is higher than many people are used to paying for mounts, but these poly mounts would likely never need to be replaced and would be far better than the rubber ones currently available and much easier on your dental work than those solid ones some of you are running out there =)

We are also exploring seeing if other vendors would like to carry these, so if you can think of someone who would perhaps like to resell these, a higher volume order could take the price down.

So..if you're interested in these, please reply below and I will start putting together a list. Again these are poly mounts for the 62-66 cars. If you have a 60-61 car, just swap that K member out and you're golden.


Thanks guys, let me know if you have any questions!

MJ[/b]

Ceej '63 Dart GT 1 set

What constitutes a set?

Both L & R motor mounts?

or

Both L & R motor mounts + tranny mount?

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

L + R


CJ

_________________
Part of Tyrde-Browne Racing

I'd be in for 1 set. I see Fanie from South Africa is also spreading the word (apparently I'm on the SA mailing list).

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014

Somebody want to put it up on Fabo?

CJ

_________________
Part of Tyrde-Browne Racing

I'm in for 1 set.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.

I am in for 1 set for sure, probably 2.

Lou

_________________
Home of Slant6-powered fun machines since 1988

Great guys, that's 7 sets for sure already, we're half way there. I'll try and post on FABO tomorrow, unless someone beats me to it.

Ed are you wanting a set?

MJ

Ceej 2 sets
65 Dartman 1 set
dakight 1 set
Dart270 1 set 2?

i would be interested in some for a '63 valiant. John.
my email is jjohnroody@yahoo.com

_________________
'63 signet 200 owner

Very cool, put me on the list for a set. If there's a choice of colors, my preference is basic black.

_________________
"Mad Scientist" Matt Cramer
'66 Dart - turbocharged 225
My blog - Mad Scientist Matt's Lair

Im in for 1 set. Has anyone contacted Year One or Legendary?
Frank

_________________
Scrapple: Because a mind is a terrible thing to waste.
73 Duster - Race Car
66 Dart Wagon - DD
178" FED
82 D150
All Slant powered

Im in for a 1 set please
62 lancer
how soon will they be here?
how do I pay...n stuff

_________________
Its so nice out side, I think I'll go lay under my car..

Hey slantsixlancer!

We're working on getting enough folks to commit to purchase right now. Once we get to 15, Menko will outline how we make our deposits.

This list started yesterday. We only have a few more to go to make the minimum order of 15. If it bumps up to 25, we may get a price break!

Where are you located? I'm in the thriving metropolis of Halsey!

CJ

_________________
Part of Tyrde-Browne Racing