Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Nov 28, 2024 9:32 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next
Author Message
 Post subject: need help bad
PostPosted: Tue Feb 16, 2010 2:17 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Sun Sep 27, 2009 3:54 pm
Posts: 16
Car Model:
i orderd an engine kit the other day for my slant six now the guy i bought it off of said it was a numbers matching 225 duster i did a vin look up on my car today and it said this car stock was a 198 can someone de-code my block number 2806830-4 thanks

_________________
real american muscle (mopar)


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 2:20 pm 
Offline
Supercharged
User avatar

Joined: Mon Jan 15, 2007 5:05 pm
Posts: 3767
Location: Black Diamond, WA
Car Model:
That's a casting number off the side of the block.......need the numbers on the deck right behind/under the alternator.

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 2:26 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Sun Sep 27, 2009 3:54 pm
Posts: 16
Car Model:
deck # 1e128469

cast # 2843169-3

_________________
real american muscle (mopar)


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 2:55 pm 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
No worry... all the parts in the engine rebuild kit are the same for either a 198 or a 225.
DD


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 3:11 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Sun Sep 27, 2009 3:54 pm
Posts: 16
Car Model:
not the rods and crank

_________________
real american muscle (mopar)


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 3:24 pm 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
If you get a "master kit" that includes con rods and crank, then you can turn your 198 into a 225... the block and all the other parts are the same.
(Be sure to keep your "core" 198 con rods!)
DD


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 3:27 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Sun Sep 27, 2009 3:54 pm
Posts: 16
Car Model:
thats just it though i want to keep it a perfectly stock and numbers matching

_________________
real american muscle (mopar)


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 3:35 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Rebuilding the original engine (if yours is in fact the original engine) does not spoil its numbers-matching originality. The rebuild kit does not contain any parts that would change a 198 engine into a 225 engine or the other way around.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 3:48 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Sun Sep 27, 2009 3:54 pm
Posts: 16
Car Model:
alright well thanks but i am just looking to find out if its a 198 or 225

_________________
real american muscle (mopar)


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 4:02 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
The number you posted (1e128469) is not the engine ID number. Check again, carefully. You're looking for a number stamped on a thin surface that faces the sky, directly below #1 spark plug, inboard of the coil mounting bracket.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 4:53 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Sun Sep 27, 2009 3:54 pm
Posts: 16
Car Model:
3041 is the only other number on my block but the crank number is 2951265

_________________
real american muscle (mopar)


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 5:01 pm 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
And connecting rod number 2951260 (198 con rod forging number)
DD


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 5:06 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Sun Sep 27, 2009 3:54 pm
Posts: 16
Car Model:
so i do have a 198

_________________
real american muscle (mopar)


Top
   
 Post subject:
PostPosted: Tue Feb 16, 2010 7:15 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13053
Location: Fircrest, WA
Car Model: 76 D100
What is the number stamped on the ledge behind the alternator and under the #1 plug? Any chance your car has an emissions sticker listing the idle speed and plug gap and such? That sticker will give the engine displacement.


Top
   
 Post subject:
PostPosted: Wed Feb 17, 2010 5:05 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Sun Sep 27, 2009 3:54 pm
Posts: 16
Car Model:
the connecting rod on one side says AAVV 2B and the other side says 2951250 HYG now the number on the ledg i belive you are talking about says 1E128469

_________________
real american muscle (mopar)


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next

All times are UTC-08:00


Who is online

Users browsing this forum: Ahrefs [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited