Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Nov 16, 2026 11:24 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Mon Mar 14, 2011 7:11 pm 
Offline
TBI Slant 6
User avatar

Joined: Sat Jul 22, 2006 12:50 am
Posts: 243
Location: Central Valley, California
Car Model:
Does the pin sit in the shaft groove and then press the reluctor down..hoping they are aligned? or press the reluctor down with the slots aligned (hopefully) and then install the pin?
Any tricks to getting the slots aligned?

Also, shaft doesn't want to come out. Stops when it is flush with the bottom of the dist. housing. I took off the burrs around the gear pin hole and cleaned it and very light emery cloth. Should I use a drift?



Thanks for the help

_________________
Image
Super Six Conversion Stromberg


Top
   
 Post subject: Yep...
PostPosted: Mon Mar 14, 2011 7:42 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
I find it easier to install the reluctor with the pin installed in it halfway...

Get it fairly close then adjust (maybe I just have strong hands...).

If you get it to seat correctly, you can use a socket as a 'die' to seat the reluctor and the pin correctly. Worse case is using a drift but use a small (like 8oz) ball peen hammer...tap not drive.

Good luck,

-D.Idiot


Top
   
 Post subject:
PostPosted: Mon Mar 14, 2011 8:22 pm 
Offline
TBI Slant 6
User avatar

Joined: Sat Jul 22, 2006 12:50 am
Posts: 243
Location: Central Valley, California
Car Model:
Thanks D.I..
What about a difficult shaft that won't come out easily?

At first it would only go up until it hit the drive gear pin hole so I filed the burrs off around the hole.
Cleaned it with chemtool to get the crud off and then did a light emery cloth.

At that point it would go up just until it was flush with the bottom of the housing but that was it.

Should I maybe oil the end that I hit with the cloth?
Any problem with a light tap on a drift?

This is a dizzy that I grabbed out of a 77 Aspen that seems to have zero shaft play. I wanted to see how a stock curve comppares to the dizzy that you have helped me to get "closer" to what I need.

Thanks again, you're knowledge in this aea is invaluable.

_________________
Image
Super Six Conversion Stromberg


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 5:33 am 
Offline
Supercharged
User avatar

Joined: Sat Feb 16, 2008 1:25 pm
Posts: 5623
Location: Downeast Maine
Car Model:
61 V200,

That reluctor is aptly named, as it can be reluctant to come off its shaft when a distributor has been sitting around for a while …

The first time I tried to disassemble my Dart’s distributor for a recurve it took an hour or more, and quite a long time to put it back together as corrosion made manipulation of its parts difficult. By the third or forth cycle of disassembly and reassembly the reluctor and the other parts began to corporate, and the process only took only a minute or to.

You are on the right track by cleaning, de-burring, and lubing the shaft and the parts that slide on to it. But be genital, and try not to lose the shiny surfaces. I found that “0000â€￾ steal wool was abrasive enough to brake most of the crud, and rust off, but not aggressive enough to damage the shaft’s polished surface.

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], DuckDuckGo [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited