Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Nov 17, 2026 6:58 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Tue Mar 15, 2011 8:51 am 
Offline
TBI Slant 6
User avatar

Joined: Wed Nov 07, 2007 7:44 am
Posts: 234
Car Model:
Hi All,

In an assembled slant, what metals are capable of coming into contact with the coolant?

I'm interested to know if using a British product (Deox C from Bilt Hamber) would be suitable for doing a 'cold' de rusting flush (without running the engine). I know the fluid is perfectly safe for use with ferrous metal and aluminium, but it does tend to attack zinc, tin and lead.

I so far have iron (for the head and block) and aluminium (for the thermostat housing and water pump), steel (my freeze plugs, various bolts and studs) and stainless steel (the manifold bolts where they enter the water jacket). The thermostat has brass elements but it will be removed. So all looks good so far . . .

Any places where different metals may be an issue? What's the head gasket likely to be made of (installed in the mid 90s)?

_________________
1960 Plymouth Belvedere 4 door sedan
Stock 60 225
Push button 3 speed Torqueflite
Right Hooker


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 9:28 am 
Offline
Turbo Slant 6

Joined: Thu Jan 04, 2007 6:38 pm
Posts: 878
Location: Boulder City Nevada
Car Model:
Depending on how old, the radiator will have solder lead,copper,possible brass.


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 9:37 am 
Offline
Turbo Slant 6

Joined: Thu Jan 04, 2007 6:38 pm
Posts: 878
Location: Boulder City Nevada
Car Model:
That is if you plan on flushing the rad too. Also on the older cast blocks they have a higher concentration of nickel. The factory head gasket is likley steel but if replaced (90's) composite.


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 10:23 am 
Offline
TBI Slant 6
User avatar

Joined: Wed Nov 07, 2007 7:44 am
Posts: 234
Car Model:
Thanks Romeo, great answers!

Yup, just the block/head/water pump are being flushed. I need to remember to take the heater matrix out of the equation too, I guess that's more than likely a soldered brass matrix (aftermarket item I think - right hand drive '60 fullsize can't use the original heater assembly as far as I understand).

High nickel content in the block eh? That may be a cause for concern - I shall have to call up about that.

When you rever to a composite gasket, what are the materials? Is it a graphite/steel type gasket?

Last of all, what's the water pump like for bearing and impellor materials? I believe the impellor is steel/iron?

_________________
1960 Plymouth Belvedere 4 door sedan
Stock 60 225
Push button 3 speed Torqueflite
Right Hooker


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 2:07 pm 
Offline
Turbo Slant 6

Joined: Thu Jan 04, 2007 6:38 pm
Posts: 878
Location: Boulder City Nevada
Car Model:
Water pump, steel parts. What about the seal in the pump ? Don't know what it will do to that. Head gasket = Steel core with paper type material on both sides bonded to the steel. Composite may not be the correct word, some have silicone sealing rings for cylinder, water, oil passages.
Just trying to think of things. Freeze plugs in the block may be brass or steel.....


Top
   
 Post subject:
PostPosted: Wed Mar 16, 2011 5:54 am 
Offline
EFI Slant 6

Joined: Sun May 23, 2010 8:38 pm
Posts: 454
Car Model:
Sorry to Hijack, Where would the solder be in the radiator?


Top
   
 Post subject:
PostPosted: Wed Mar 16, 2011 6:23 am 
Offline
Turbo EFI

Joined: Sat Feb 19, 2005 9:57 am
Posts: 1818
Car Model:
solder at all seams in rad and heater core


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited