What is the size of the line (Diameter) from the master cylinder to the proportioning valve on a 1964 Dodge Dart? And anyone knows the length you get to bend it out of?

Thanks

_________________
1964 Dodge Dart 270 four door. Three speed automatic 225 Slant with a Carter BBS carb.

i have a 70 and it was 3/16 line, you could get away with a foot or 16" if you put a loop in it. also, the master cylinder fitting is a bigger size than the 3/8 one it comes with. i'd suggest finding the right fitting and flaring (double) the line and doing it right. i bought mine at a local auto parts store (i ended up just buying the spool, $25 i believe).

_________________
70 Plymouth Valiant 4dr

Thanks for the info I need yo replace my master cylinder and want to replace the line they look.like the original parts and I want the replacement to look original ............

_________________
1964 Dodge Dart 270 four door. Three speed automatic 225 Slant with a Carter BBS carb.

The "single pot" systems used a 1/4 tube size leading down to the metering block.
Be careful with the fittings that come on pre-made hard lines these days, some of those do not fully seat in the fitting on the master cylinder.
DD

Thanks tor the info about the single pot system that is it for sure ...............

_________________
1964 Dodge Dart 270 four door. Three speed automatic 225 Slant with a Carter BBS carb.