Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 20, 2026 10:55 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Housing straight-ness
PostPosted: Thu Jun 27, 2013 9:36 pm 
Offline
Board Sponsor
User avatar

Joined: Sat Feb 08, 2003 2:37 pm
Posts: 4194
Location: CA
Car Model:
Recently scored an original (not b/c/e housing that's been shortened) A body 8 3/4. No idea of it's past history. Should I be worried about how straight the housing is? I believe on my last one I took it to a shop to have bearings pressed on the axles and rebuilt the dropout and told them to check it for straight-ness while it was there. On this one I won't need to do shop work, but should I take it there and have it checked out? Or is it not worth it? This project will eventually turn into a daily driver.


Top
   
 Post subject:
PostPosted: Fri Jun 28, 2013 8:30 am 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
I would not worry. If it all turns over freely its straight enough. The only bent housing I can remember broke axles repeatedly. Thats how I figgered out it was bent.

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
 Post subject:
PostPosted: Fri Jun 28, 2013 9:39 am 
Offline
Board Sponsor
User avatar

Joined: Sat Feb 08, 2003 2:37 pm
Posts: 4194
Location: CA
Car Model:
Gulp... I don't wanna break $300 axles!


Top
   
 Post subject:
PostPosted: Sat Jun 29, 2013 8:25 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 17688
Location: Blacksburg, VA
Car Model:
If it's that bent, you can probably see it by eye. I've not seen an 8.75" housing bent.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
 Post subject: Lol...
PostPosted: Sat Jun 29, 2013 8:38 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
I've not seen an 8.75" housing bent.
I took a full force hit to the 8 3/4" rear in the Fury I was running for my first demo derby...it completely wasted the trunk, rear quarter panels, and leaf springs, tore the shocks off the plates....but the rear was plenty straight and fine after getting clobbered by the welded up ford that tagged me...

It's a pretty stout rear...(much better than the 1971-1973 Ford Mustang 9" rear, for sure!)

-D.Idiot

I probably wouldn't have gotten tagged like that if I hadn't mounted a big Pacman on top of the car....


Top
   
 Post subject:
PostPosted: Sat Jun 29, 2013 10:20 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 23, 2005 1:50 pm
Posts: 2355
Location: Pertneer Nashville TN
Car Model:
I watched one bend. 4 door '68 Satellite 440 4:56 gears. We thought the U joint scattered. I was filming it and told the girls next to me, "wanna see a 4 door to a wheel stand?" We noticed it was twisted the next morning. :shock:

_________________
'72 Duster 198 stock cam, 3:23's

93 D350 Cummins THD Maxfuel 35mpg parts to hit 400hp+ Suncoast Cat2 A518, converter DDP Stage III injectors 62/64 HX35, 3 piece manifold, 4" Diamond Eye, Gear Venders OD. Stage I street/tow PDD head on order.


Top
   
 Post subject:
PostPosted: Tue Jul 02, 2013 11:22 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14984
Location: Park Forest, Illinoisy
Car Model: 78 Volare
Unless it came out of a heavy drag car I would not worry.

_________________
Official Cookie and Mater Tormentor.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited