Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 20, 2026 2:09 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 15 posts ] 
Author Message
 Post subject: Tranny fluid
PostPosted: Sun Jul 07, 2013 10:10 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
Anyone have a recommendation for proper tranny fluid for my A-904? Any particular brand or grade better for my trans?

thanks,

BG


Top
   
 Post subject:
PostPosted: Sun Jul 07, 2013 10:12 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13431
Location: Fircrest, WA
Car Model: 76 D100
ATF+4. Pricey, but good.


Top
   
 Post subject:
PostPosted: Mon Jul 08, 2013 7:14 am 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 23, 2005 1:50 pm
Posts: 2355
Location: Pertneer Nashville TN
Car Model:
Type F............waiting for the fire storm.........

_________________
'72 Duster 198 stock cam, 3:23's

93 D350 Cummins THD Maxfuel 35mpg parts to hit 400hp+ Suncoast Cat2 A518, converter DDP Stage III injectors 62/64 HX35, 3 piece manifold, 4" Diamond Eye, Gear Venders OD. Stage I street/tow PDD head on order.


Top
   
 Post subject:
PostPosted: Mon Jul 08, 2013 8:20 am 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13431
Location: Fircrest, WA
Car Model: 76 D100
Actually, you may want to look at Dexron 6! Sounds like a bad sci-fi movie.


Top
   
 Post subject:
PostPosted: Mon Jul 08, 2013 10:01 am 
Offline
Board Sponsor
User avatar

Joined: Sun Nov 03, 2002 9:55 pm
Posts: 577
Location: Gloucester, Va
Car Model:
Type F here also.
Will


Top
   
 Post subject: Rebuild or fluid change?
PostPosted: Mon Jul 08, 2013 10:14 am 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
If you're just doing a filter/fluid change, then stick to Dexron.

If this is a rebuilt tranny and it was all cleaned for a fresh start then you can put in Type F, ATF+4, etc... If you are in scenario #1 mixing Type F and the Dexron in the undrained torque convertor won't work too well (or too long).

-D.Idiot


Top
   
 Post subject: ok....
PostPosted: Mon Jul 08, 2013 10:57 am 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
I don't mean to start a firestorm, sorry in advance if that happens.

I drained the fluid to change the filter, I didn't drain the torque converter. It was a recently rebuilt tranny. I don't know what fluid was used....hmmm. I have the engine out, so I could also drain the torque converter, should I? Any special things I should do there? I did notice some very fine shiny bits in the fluid, likely from break in wear. The tranny only has a few thousand miles on it, shifts great.

I can call the place that rebuilt the unit, but my experience was that Dexron is usually used in Mopars/GM and Type-F was for Fords. I was just asking about variations in brand...but now you've got me worried. Don't most rebuilders stick to Dexron as it is recommended for Mopars?

Why do people run Type-F in Mopars? Is it because it grabs better, more friction? My A-904 shifts awesome as it is, don't need more grab.

Thanks all,

BG


Top
   
PostPosted: Mon Jul 08, 2013 11:19 am 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
...which said...

If you find a quality brand of ATF+4 for a reasonable price, use it.
If you find a quality brand of Dexron-VI for a a reasonable price, use it.

Sounds like sound advice...

So, I'll likely drain the torque converter and replace with one of the above fluids. I've never drained a torque converter, do I simply drain it, fill with the fluid of choice above, reinstall?

Anyone know offhand the capacity of the A-904 including torque converter?

thanks,

BG


Top
   
 Post subject:
PostPosted: Mon Jul 08, 2013 11:33 am 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13431
Location: Fircrest, WA
Car Model: 76 D100
I'd listen to Dan's advice. I have run ATF+4 in all the Mopars I maintain for the past few years and it has worked great.

I contacted Dan via e-mail this morning and he says that Dexron-VI surpasses even ATF+4 in terms of the relevant properties for a transmission fluid.

My recommendation would be to use Dexron-VI is you want the absolute BEST fluid for your transmission. Older, inferior fluids will "work," and might even work well enough to keep you happy for decades, but the latest fluids will work better.


Top
   
 Post subject: Well...
PostPosted: Mon Jul 08, 2013 12:00 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Yes the performance guys run Type F because it's stickier, but also more commonly available and cheaper...(litmus test here is going into the quickie mart and seeing if you can get a bottle of either off the shelf...which would be one of those, I just pulled in to the gas station and don't have a spare bottle in the trunk).

Since you are not racing and just daily driving I'd go with Dan and Reed...

But, I will give both a bad time since neither have put together
a performance slant yet (min 10:1SCR, 4 barrel, about 200hp), so they
can't say what how +4 and Dex-6 would handle repeated runs at the
track.


:wink:


Top
   
 Post subject:
PostPosted: Mon Jul 08, 2013 12:04 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13431
Location: Fircrest, WA
Car Model: 76 D100
That's true. All my wrenching has been on daily drivers and very mild performance upgrades. Still, my brother managed to burn up SEVEN transmissions in his van (including two 727s) but the 904 I built him and filled with ATF+4 has held up fine for over a year now with his crazy driving and hauling of heavy loads. Knock on wood.

What works at the track doesn't necessarily work for a daily driver.


Top
   
 Post subject: Not if...
PostPosted: Mon Jul 08, 2013 12:49 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
What works at the track doesn't necessarily work for a daily driver.
That is somewhat true, but I am talking apples to apples...on a "street" car at the track (which most are), everything to improve performance applies to both fields...including the drive train...it will be the trailered only cars that would not apply...

-D.Idiot


Top
   
 Post subject:
PostPosted: Mon Jul 08, 2013 1:01 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 23, 2005 1:50 pm
Posts: 2355
Location: Pertneer Nashville TN
Car Model:
Less slippage with F. I have ran it in my van for 100K+ miles. Commercial use usually running 5800lbs gross or more. Pulled the Duster to Florida and back. 2200 stall no name converter and me thrashing on it. Firm shifting, no shift kit.

It's a "rug truck!"

_________________
'72 Duster 198 stock cam, 3:23's

93 D350 Cummins THD Maxfuel 35mpg parts to hit 400hp+ Suncoast Cat2 A518, converter DDP Stage III injectors 62/64 HX35, 3 piece manifold, 4" Diamond Eye, Gear Venders OD. Stage I street/tow PDD head on order.


Top
   
 Post subject:
PostPosted: Mon Jul 08, 2013 1:03 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13431
Location: Fircrest, WA
Car Model: 76 D100
OK, well, I will say run whatever you want then, so long as it is at least what is recommended by the manufacturer.


Top
   
 Post subject:
PostPosted: Mon Jul 08, 2013 3:26 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 23, 2005 1:50 pm
Posts: 2355
Location: Pertneer Nashville TN
Car Model:
Quote:
OK, well, I will say run whatever you want then, so long as it is at least what is recommended by the manufacturer.
Type F used to be known as B&M Trickshift. Dexron is specified. ATF4 is what I run in the dually due to OD concerns and newer design. That is a must AFAIK.

_________________
'72 Duster 198 stock cam, 3:23's

93 D350 Cummins THD Maxfuel 35mpg parts to hit 400hp+ Suncoast Cat2 A518, converter DDP Stage III injectors 62/64 HX35, 3 piece manifold, 4" Diamond Eye, Gear Venders OD. Stage I street/tow PDD head on order.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 15 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited