Well, this sure is easier to fit-up when you actually cut the pipe square.
Now if I can only get my welds to not look like pigeon poop........



Sectioned from a 2 1/4" Dynomax mandrel 'J' bend, thought I should go bigger but that's the size I opened the manifold to. It think it should work.



Made a throttle cable bracket for the Holley using an extra mopar cable clamp and a mystery throttle/kickdown bracket from the bone pile. The generic mopar cable clamp seats nicely in the notch and around the corner of the Holley base plate so I don't have to figure out my own tab(s) to control bracket pull/rotation.



Mystery bracket gets welded to the hold down clamp then it gets chopped and tweaked.



Not pretty but works perfect. I think I'll paint it.

_________________
1966 Coronet Deluxe

Looks dang near perfect to me! Paint and shorten or darken that bright stud & call it DONE!

BC

_________________
'64 Dart GT convertible, 64 Dart 170 2-door post sedan in faded blue and rust (the Az Dart) & a sixty THREE Dart 170 2-door post sedan in faded blue and rust. (future project)
Early Dart Disorder (EDD) is real, and I've got it!