I see there are some screw cable ends on ebay by accel . my stock end on the positive is craked from misuse..any one ever used such and item ?

http://www.ebay.com/itm/New-Accel-1861- ... 99&vxp=mtr

_________________

slant six's RULE!
http://www.usajon.com

I like the military style clamps here http://www.prime4x4.com/shop/OffRoad-El ... erm001.htm
and the covers that go with them.
It makes it easier to make up your own cables with soldered rings on the ends.
The boots also available here http://www.remybattery.com/terminal-pro ... ector.aspx

Dave

_________________
86 Miser 170,000+
2 1/4" exhaust
Holley 1920 #55
HEI MSD BLaster 2
17.8 mpg

I put copper lugs on the cable.

Then bolt the lugs to a brass terminal.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

I also use copper lugs on the cables.

Then I bolt the lugs to a side-terminal battery.

Connections remain exposed just like the good old days, but now the top of battery can be safely used as a place to set down a tool and your beer.

_________________
1966 Coronet Deluxe

I have never used those screw in clamp style terminals but I think they would work fine as long as you have the correct gauge wire.I personally use the solder type terminals,better all round in my book.