Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 9:00 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next
Author Message
 Post subject: 1965 904
PostPosted: Wed Apr 09, 2014 4:02 pm 
Offline
Turbo Slant 6
User avatar

Joined: Thu Dec 09, 2010 8:45 pm
Posts: 578
Location: Orange County
Car Model:
Planning on rebuilding my 904 in 65 valiant with slant six.

I was told or read somewhere this is a one year only transmission? What makes it so, if true. And also whats my best bet for a complete parts kit. I have a manual already.

Trans has always been kinda slippy, but after I parked it for some carb problems. Trans is pouring fluid. Its on level ground, either from the rear of the pan, or above it.


Top
   
 Post subject:
PostPosted: Wed Apr 09, 2014 5:18 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Mar 25, 2009 5:56 pm
Posts: 1315
Location: TEXAS
Car Model:
Hopefully Charlie_S will reply, but I think the One Year on the 1965 904 has to do with it being a single cable(?), as opposed to 1964 dual cables and 1966 switch to hard linkage.

_________________
1964 Dart GT


Top
   
 Post subject:
PostPosted: Thu Apr 10, 2014 1:02 pm 
Offline
Turbo Slant 6

Joined: Sat Apr 02, 2011 12:58 pm
Posts: 569
Location: New Jersey USA
Car Model:
AFAIK, the 1965 "one year only" status is for the 727 trans- it had dual cables for shifting like earlier units but was the first torque-flite to have a splined output shaft with a "normal" slip yoke on the driveshaft. The 904 was pretty much the same as 64- dual cables, flanged output for a ball & trunion joint, etc. I believe that all 65's also had column or floor shifters (no more pushbuttons).


Whatever parts you get need to be for the "early " (cable shifted) 904. There are quite a few differences between the 60-65 vs. 66-up units. Some parts or assemblies can be swapped, some can't- or require mods to do so.

_________________
63 Valiant Wagon
225 - 4 bbl


Top
   
 Post subject:
PostPosted: Thu Apr 10, 2014 1:19 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Mar 25, 2009 5:56 pm
Posts: 1315
Location: TEXAS
Car Model:
Yes, 1964 was the end of Pushbuttons, but I believe the cable for shifting the 904 is different for 1965, among other small things. Like WagonsRcool said column and floor shifters only for Automatics. I don't know anything about 727's.(Trucks & Taxis?)

_________________
1964 Dart GT


Top
   
 Post subject:
PostPosted: Thu Apr 10, 2014 4:06 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
The only difference between the 64 and 65 904, is the valve body, and the cables themselves. The cables will interchange on the trans, with the correct valve body. The shifter end of the cables and the length is the difference.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Thu Apr 10, 2014 4:43 pm 
Offline
Turbo Slant 6
User avatar

Joined: Thu Dec 09, 2010 8:45 pm
Posts: 578
Location: Orange County
Car Model:
Just curious, would I be able to buy any 904, and swap over my valve body?

Also whats my best bet as far as a rebuild kit


Top
   
 Post subject:
PostPosted: Thu Apr 10, 2014 5:18 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
Quote:
Just curious, would I be able to buy any 904, and swap over my valve body?
Any cable shifted 904
Quote:
Also whats my best bet as far as a rebuild kit
Haven't bought one for several years, so not sure what the availability is at this time. But there should still be several sources.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Thu Apr 10, 2014 5:49 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Mar 25, 2009 5:56 pm
Posts: 1315
Location: TEXAS
Car Model:
Quote:
best bet as far as a rebuild kit
Torqueflite Patty "Pat Blais" tflitepatty@verizon.net

_________________
1964 Dart GT


Top
   
 Post subject:
PostPosted: Thu Apr 10, 2014 10:58 pm 
Offline
Turbo Slant 6
User avatar

Joined: Thu Dec 09, 2010 8:45 pm
Posts: 578
Location: Orange County
Car Model:
Thanks. I tried the email but it did not work

Is there any way to quickly tell if a trans is a cable, or cable shifted if its out of a car? Sorry never had a 904 out to look at before. Im tempted to find a spare trans to throw in for now if its an easy enough swap


Top
   
 Post subject:
PostPosted: Fri Apr 11, 2014 5:12 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
They are easy to tell apart. A picture is worth a thousand words, but I can't post a picture. Maybe someone else can post one.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Fri Apr 11, 2014 6:33 am 
Offline
Turbo Slant 6
User avatar

Joined: Thu Dec 09, 2010 8:45 pm
Posts: 578
Location: Orange County
Car Model:
Thanks charlie. I wish I could still figure out my carb issue. Its been sitting for almost a year, after the issue. Then the trans started pouring. Then a wheel cylinder popped. .... thank god it happend sitting in garage, not while driving.. single circuit


Top
   
 Post subject:
PostPosted: Fri Apr 11, 2014 10:03 am 
Offline
Turbo EFI
User avatar

Joined: Wed Mar 25, 2009 5:56 pm
Posts: 1315
Location: TEXAS
Car Model:
Quote:
Then the trans started pouring.
Have you looked at the O-Ring on the dipstick tube?

This article has some good info. and pictures.
http://www.1962to1965mopar.ornocar.com/transtech.html

_________________
1964 Dart GT


Top
   
 Post subject:
PostPosted: Fri Apr 11, 2014 12:05 pm 
Offline
Turbo Slant 6
User avatar

Joined: Thu Dec 09, 2010 8:45 pm
Posts: 578
Location: Orange County
Car Model:
Its either coming from the rear of the pan gasket, or something above the rear of pan


Top
   
 Post subject:
PostPosted: Fri Apr 11, 2014 12:35 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Mar 25, 2009 5:56 pm
Posts: 1315
Location: TEXAS
Car Model:
solve that problem!
http://www.realgaskets.com/files/popups/popup167.html

_________________
1964 Dart GT


Top
   
 Post subject:
PostPosted: Sat Apr 12, 2014 5:53 pm 
Offline
Turbo Slant 6

Joined: Sat Apr 02, 2011 12:58 pm
Posts: 569
Location: New Jersey USA
Car Model:
Quote:
Is there any way to quickly tell if a trans is a cable, or cable shifted if its out of a car?
The cable shifted 904's had a round output flange with studs for the B & T driveshaft & a hole on the left front corner of the case for the shift cable- just one lever for the kickdown. Rod-linkage shift 904's had the splined output shaft (no flange), & two levers on the left side - the kickdown right above the shift lever.

_________________
63 Valiant Wagon
225 - 4 bbl


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited