Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 6:25 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 69 posts ]  Go to page 1 2 3 4 5 Next
Author Message
PostPosted: Mon Nov 07, 2005 7:46 pm 
Offline
Turbo EFI
User avatar

Joined: Sat Nov 29, 2003 5:45 pm
Posts: 1903
Location: Hamilton the STEEL CITY, ON
Car Model:
See page two for the troubleshooting fun.

Ive got one on my '64 Polara engine, has a funny logo on the top plate, I think it says DPCO? What kind of pump is this and where can I get a rebuild kit for it? Id hate to throw it out in favor of a sealed unit. Also, what pressure should it put out? 5 lbs?

_________________
I've been calling it as i see it for my entire life and that's not about to change. Take it or leave it.


Last edited by steponmebbbboom on Sat Nov 12, 2005 3:15 pm, edited 2 times in total.

Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 7:51 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Jul 08, 2003 11:33 am
Posts: 2378
Location: Central GA
Car Model: Many & varied, including stock & hopped up /6's
mebee DPCD kinda in a square? If so, stands for "Dodge, Plymouth, Chrysler, DeSoto"

D/W

_________________
Image
If it ain't broke, fix it!


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 8:07 pm 
Offline
2 BBL ''SuperSix''

Joined: Sat Oct 22, 2005 6:38 am
Posts: 10
Car Model:
Ya, DPCD. That's probably built for Mopar by Carter, now part of TRW/Federal Mogul conglomerate. They [Carter Division] still make rebuildable fuel pumps and they're very likely the same as what you have from the factory.


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 8:27 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
If its the same thing I think it is,,,,they are easily rebuilt. I once rebuilt a 47 International fuel pump in under 10 mins by making a new diaphram out of a hunk of leather. (make sure you oil it up real good).\

You will need a good blade screwdriver, a pair of scissors, some sno-seal and a 1/2" box end wrench....and oh,yeah,,,,an old cowboy boot.

I like those old KB Outernationals,,,,,,,,,

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 8:43 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
The leather trick is cool and interesting, but a leather diaphragm won't survive well with today's politically-correct gasoline.

Those rebuildable pumps are easy to rebuild, and a very complete rebuild kit can be had from Antique Auto Parts Cellar in MA. Last time I bought was it was about $22. Includes a new diaphragm, new valves, new air dome gasket, all new springs, new mounting gasket, etc—all alcohol-resistance for long life with today's fuels. Very nice quality. The original pump on '60-'63 slant-6s was a rebuildable Carter number M2996s.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 8:46 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Quote:
Carter, now part of TRW/Federal Mogul conglomerate. They [Carter Division] still make rebuildable fuel pumps and they're very likely the same as what you have from the factory.
Not for slant-6s, they don't! There are still a few "Carter" rebuildable high-pressure/high-volume pumps available for V8s, but nothing with the specs or dimensions of the '60-'63 Carter rebuildable Slant-6 pump. Virtually all the Slant-6 pumps available on the market in any box (very few actual makers) have been crimped/sealed/nonrebuildable since '64.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 8:50 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
I guess I should have added,,,"now kids...dont try this at home"

.....that pump did work all that summer though,,,,then the old KB and I parted company....
I saw her one last time though...in the Canmore Alberta Fire Departments No1 firehall,,,,on display. Long may you run,,,,,


450" straight six, 1barrel up draft Carter carb,Clark 5 speed non - synchro , straight cut gears...14000 miles.

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
 Post subject:
PostPosted: Tue Nov 08, 2005 2:42 pm 
Offline
Turbo EFI
User avatar

Joined: Sat Nov 29, 2003 5:45 pm
Posts: 1903
Location: Hamilton the STEEL CITY, ON
Car Model:
Is the number embossed anywhere? As it sits it tested at 4 lbs but is displaying symptoms of a bad pump. Runs nice for as long as you would expect it to before the fuel bowl empties, then it completely loses horsepower, backfires through the intake, and you have to pump the gas to keep it running. Other than the occasional backfire the engine runs smoothly even though it has no power. Come to a stop, take it out of gear and it runs like a watch. Take off again, same thing. Compression is 115 to 135, 1,2, and 6 are the highest. Needle valve looks fine. Plugs show lean. I havent checked valve clearance yet, Ill be doing that tonight.

_________________
I've been calling it as i see it for my entire life and that's not about to change. Take it or leave it.


Top
   
 Post subject:
PostPosted: Tue Nov 08, 2005 2:44 pm 
Offline
Turbo EFI
User avatar

Joined: Sat Nov 29, 2003 5:45 pm
Posts: 1903
Location: Hamilton the STEEL CITY, ON
Car Model:
I should add that to my sig line, My other car has a rebuildable fuel pump too. Gotta love it.

_________________
I've been calling it as i see it for my entire life and that's not about to change. Take it or leave it.


Top
   
 Post subject:
PostPosted: Tue Nov 08, 2005 2:55 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
Quote:
Is the number embossed anywhere? As it sits it tested at 4 lbs but is displaying symptoms of a bad pump. Runs nice for as long as you would expect it to before the fuel bowl empties, then it completely loses horsepower, backfires through the intake, and you have to pump the gas to keep it running. Other than the occasional backfire the engine runs smoothly even though it has no power. Come to a stop, take it out of gear and it runs like a watch. Take off again, same thing. Compression is 115 to 135, 1,2, and 6 are the highest. Needle valve looks fine. Plugs show lean. I havent checked valve clearance yet, Ill be doing that tonight.

Could be a clogged up fuel filter or fuel sock......

There's enough fuel volume under a low-load condition, but not otherwise.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)


Top
   
PostPosted: Tue Nov 08, 2005 5:04 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Ohhh...y'know what? I just remembered, the fuel pump used on '60-'63 (maybe through early '64) in Canada is different than the US M2996S unit. The M2996s hasn't got the "DPCD" logo on it, but the Canadian-production pump does. Interchangeable as an assembly, but probably takes a different kit. If you pull it and clean it, you should find the actual mfr and the number stamped into the housing.

DS

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Nov 08, 2005 5:57 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
Chryco instead of MOPAR.

I seem to remember early pumps having the telltale ring of slot head screws. I havn t seen one in a long time....

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
 Post subject:
PostPosted: Tue Nov 08, 2005 7:05 pm 
Offline
Turbo EFI
User avatar

Joined: Sat Nov 29, 2003 5:45 pm
Posts: 1903
Location: Hamilton the STEEL CITY, ON
Car Model:
I thought of that, but I backflushed the relatively new filter with fuel through an old rag and didnt see any sediment to speak of... The carb is a recent rebuild, too...

_________________
I've been calling it as i see it for my entire life and that's not about to change. Take it or leave it.


Top
   
PostPosted: Tue Nov 08, 2005 7:09 pm 
Offline
Turbo EFI
User avatar

Joined: Sat Nov 29, 2003 5:45 pm
Posts: 1903
Location: Hamilton the STEEL CITY, ON
Car Model:
Quote:
Ohhh...y'know what? I just remembered, the fuel pump used on '60-'63 (maybe through early '64) in Canada is different than the US M2996S unit. The M2996s hasn't got the "DPCD" logo on it, but the Canadian-production pump does. Interchangeable as an assembly, but probably takes a different kit. If you pull it and clean it, you should find the actual mfr and the number stamped into the housing.

DS
That makes perfect sense as this engine was also fitted with the cast iron Prestolite distributor. I tested this pump at 4 lbs and really didnt find anything all that horrible under the cap on the top, a little rusty water and that was it. I wish this problem was as simple as changing the pump, but I cant see that it is.

_________________
I've been calling it as i see it for my entire life and that's not about to change. Take it or leave it.


Top
   
 Post subject:
PostPosted: Tue Nov 08, 2005 8:45 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Yep, the cast iron Prestolite IBR-4203G distributor and the iron-and-steel "Auto Lite" (Prestolite) MDT-6017 direct-drive starter, too, I'll wager...

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 69 posts ]  Go to page 1 2 3 4 5 Next

All times are UTC-08:00


Who is online

Users browsing this forum: Google [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited