2bbl air cleaner base needed

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Old Message Board

All times are UTC-08:00

2bbl air cleaner base needed

Forum locked This topic is locked, you cannot edit posts or make further replies.

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Daniel J. Stern

Post subject: 2bbl air cleaner base needed

PostPosted: Wed Jun 27, 2001 11:54 am

I need a good "small" (e.g. Carter BBD/smallblock) 2bbl air cleaner baseplate. The space constraints in the '62 A-body engine compartment mean in order to run my 2bbl, I need to cut the carb hole out of a 2bbl baseplate and "paste" (weld) it onto a 1bbl baseplate so I can use the 1bbl air cleaner assembly that clears the engine bay. Doug or anyone?

DS

redbear@vrx.net

Top

Reply with quote

Wesley A. Moeller

Post subject: Re: 2bbl air cleaner base needed

PostPosted: Thu Jun 28, 2001 11:16 am

Quote:

: I need a good "small" (e.g. Carter
: BBD/smallblock) 2bbl air cleaner baseplate.
: The space constraints in the '62 A-body
: engine compartment mean in order to run my
: 2bbl, I need to cut the carb hole out of a
: 2bbl baseplate and "paste" (weld)
: it onto a 1bbl baseplate so I can use the
: 1bbl air cleaner assembly that clears the
: engine bay. Doug or anyone?

Dan,

Are you still looking for one of these? Let me know, if you just need a 2bbl air cleaner base, I'm sure I can find one in my garage.

Let me know,

Wes '78 Volare

<A HREF="mailto:wes.moeller@compaq.com">wes.moeller@compaq.com</A>
:
: DS

wes.moeller@compaq.com